Z arm Mixer
The sigma/Z blades mixer is an ideal equipment for mixing, kneading, vulcanizing and polymerizing high viscosity materials. Sigma mixer can be used to produce silicone rubber, sealant, hot melt adhesive, food gum base, pharmaceutical preparations, bubble gum ,chewing gum and so on. The sigma blade mixer is a special mixing and kneading device. The most commonly used is the use of two Z blades, which are arranged side by side in parallel, that is, the speed of a stirring blade is fast and the speed of a stirring blade is slow to produce a shear Cutting force, different paddle speed makes the mixing of materials can be quickly cut, so that the material can be mixed evenly.
The machine is used to knead, mix, crush, disperse and re-polymerize high viscosity paste or elastoplastic. Materials, which can not be processed by the general powder mixers and liquid blenders.The working principle of the kneader is that the strong shear action produced by a pair of matching and rotating blades (usually Z-shaped) makes the semi-dry or rubber-like viscous plastic materials react quickly to obtain uniform mixing. It is the ideal equipment for all kinds of chemical products and has the merits of stirring evenly, kneading efficiently and no dead corner. The materials are scraped, stretched, folded and squeezed among the blade, slot wall, and ridge-like protrusions. The materials cycle from one end of the impeller to the other. The two mixing paddles are tangent and spin at different speeds to complete the kneading process. Tilt the chamber to discharge the materials.
Drive motor power
Mixing Speed (rpm)
Front Blade/Rear Blade
| Optional parameters||Optional parameters |
Manual / Hydraulic tilting
The bottom pumping
1,Temperature range: 0-300°,
2, Pressure range:-0.1-0.6MPa,
3,Inverter for frequency control if necessory.